Product ID:8727 SPRAYBOOTH CHEMICAL
MSDS Date:01/20/1988
FSC:6850
NIIN:00N023976
MSDS Number: BQBKQ

NALCO CHEMICAL COMPANY

ONE NALCO CENTER
NAPERVILLE, IL 60563-1198
US

Emergency Phone: 708-920-1510

Info Phone: 708-305-1000

Preparer: JOHN J. KASPER

Cage: 89524

ONDEO NALCO COMPANY

NAPERVILLE, IL 60563-1198 US

Telephone: (630) 305-1000

Cage: 89524

(ORL,RAT)1280 MG/KG.

CAS: 1344-09-8

Fraction By Weight: 20-40%

(ORL,RAT)205 MG/KG.

CAS: 1310-58-3

RTECS: TT2100000

Fraction By Weight: 10-20%

OSHA PEL 2 MG/M3, C

ACGIH TLV: 2 MG/M3, C

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

SHOCK, RESPIRATORY DEPRESSION & CONVULSIONS MAY

RTECS: 9999999ZZ

RECOVERY OR SALVAGE DRUMS OR TANK TRUCK FOR

RTECS: 9999999ZZ

LD50 LC50 Mixture:SEE INGREDIENTS.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE:SEVERE IRRITATION/BURNING OF
EYES & SKIN. EYE:CORROSIVE W/POSSIBLE PERMANENT DAMAGE DEPENDING ON
LENGTH OF EXPOSURE & ON FIRST AID ACTION GIVEN. SKIN:CORROSIVE,
POSSIBLY RESULTING IN 3RD DEGREE BURNS DEPENDING ON LENGTH OF
EXPOSURE &FIRST AID ACTION GIVEN. INGEST:CAN BE HARMFUL. INHAL:CAN
BE (EFT OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ:CORROSIVE TO MUCOUS MEMBRANES & LUNGS.
Medical Cond Aggravated by Exposure:A REVIEW OF AVAILABLE DATA DOES NOT
IDENTIFY ANY WORSENING OF EXISTING CONDITIONS.

First Aid:EYES:IMMED FLUSH FOR @ LST 15 MIN WHILE HOLDING EYELIDS OPEN.
CALL MD @ ONCE. SKIN:IMMED FLUSH W/WATER FOR @ LST 15 MIN. FOR LG
SPLASH, FLOOD BODY UNDER SHOWER. CALL MD @ ONCE. INGEST:DO NOT
INDUCE VO MIT. GIVE WATER. CALL MD @ ONCE. INHAL:REMOVE TO FRESH
AIR. SUPPORT BRTHG (GIVE O*2/ARTF RESP) . CAUTION! IF UNCON, HAVING
TROUBLE BRTHG/IN CONVLS, DO NOT INDUCE VOMIT/GIVE WATER. (SUPP
DATA)

Flash Point Method:PMCC
Flash Point:NONE
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER.

Spill Release Procedures:SM LIQ SPILLS:CONTAIN W/ABSORB MATL, SUCH AS
CLAY, SOIL/ANY COMMERCIALLY AVAIL ABSORB. SHOVEL RECLAIMED LIQ &
ABSORB INTO RECOVERY/SALVAGE DRUMS FOR DISP. REFER TO CERCLA IN
SECT 14. LG LIQ SPILLS:DIK E TO PVNT FURTHER MOVEMENT & RECLAIM
INTO (ING 4)
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:CAUSES BURNS TO SKIN & EYES. DO NOT
GET IN EYES, ON SKIN, OR ON CLOTHING. WEAR GOGGLES OR FACE SHIELD
WHEN HANDLING. DO NOT TAKE INTERNALLY.
Other Precautions:EMPTY CONTAINERS MAY CONTAIN RESIDUAL PRODUCT. DO NOT
REUSE CONTAINER UNLESS PROPERLY RECONDITIONED.

Respiratory Protection:IF POSS TO GENERATE SIGNIFICANT LEVELS OF MISTS,
NIOSH/MSHA PPRVD/EQUIV DUST & MIST RESP IS RECOM. FOR LG SPILLS,
ENTRY INTO LG TANKS, VESSELS/ENCLSD SM SPACES W/INADEQ VENT,
NIOSH/MSHA APPRVD PRESS-D EMAND SCBA IS RECOM.
Ventilation:GENERAL VENITLATION IS RECOMMENDED.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:CHEM WORK GOGG & FULL LGTH FCSHLD
Other Protective Equipment:APRON & FULL SLICKER SUIT IS RECOM IF GROSS
EXPOSURE IS POSS. AVAIL OF EYE WASH FOUNTAIN & SFTY SHOWER IS
RECOM.
Work Hygienic Practices:IF CLTHG IS CONTAM, REMOVE CLTHG & THORO WASH
AFFECTED AREA. LAUNDER CONTAM CLTHG BEFORE REUSE.
Supplemental Safety and Health
MATLS TO AVOID:HEAT, SPLATTERING/BOILING & RELEASE OF TOX FUMES. FIRST
AID PROC:NOTE TO MD:NO SPEC ANTIDOTE IS KNOWN. BASED ON INDIVIDUAL
RXNS OF PATIENT, MD'S JUDGMENT SHOULD BE USED TO CONTROL SYMPS &
CLINICAL CNDTN. PROBABLE MUCOSAL DMGMAY CONTRAINDICATE USE OF
GASTRIC LAVAGE. MEASURES AGAINST CIRCULATORY (ING 3)

HCC:C2
Boiling Pt:B.P. Text:212F,100C
Spec Gravity:1.4 @ 60F
pH:13
Solubility in Water:COMPLETELY
Appearance and Odor:HAZY STRAW COLORED LIQUID; WEAK ODOR.

AVOID CONT W/STRONG ACIDS (EG. SULFURIC, PHOSPHORIC, NITRIC,
HYDROCHLORIC, CHROMIC, SULFONIC) WHICH CAN GENERATE(SUPDAT)
Stability Condition to Avoid:DO NOT USE WITH MILD STEEL, BRONZE,
ALUMINUM OR POLYURETHANE.
Hazardous Decomposition Products:NONE SPECIFIED BY MANUFACTURER.

Waste Disposal Methods:IF PROD BECOMES WASTE, IT MEETS CRITERIA OF HAZ
WASTE AS DEFINED UNDER RCRA 40CFR261. AS HAZ LIQ WASTE, IT MUST BE
SOLIDIFIED BEFORE DISP IN LANDFILL. CAN BE DEEP-WELL INJECTED I/A/W
LOC, STATE & FED REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.